Home Improvement

Warning Signs That You Got The Wrong Product For Surface Protection

Are you planning a house remodel or a project that entails the use of heavy materials and tools? You are probably worried that your surfaces may sustain scratches and stubborn stains. But your floor will be safe if you install some temporary protective materials. It is normal to come across challenges when choosing the best surface protection products, especially with a limited budget. Find out how you can avoid falling for low-quality products.

Inadequate Adhesion

If you just bought a protector film, then it starts to peel off; you have probably bought the wrong film for the project. Poor adhesion can also be caused by dirt on the surface. So, make sure the area that needs to be covered has no moisture or dust before the application. Most importantly, buy the correct adhesive with suitable tack for the prevailing weather. Check whether it has been stretched evenly to prevent distortion or ineffective seal.

Difficulty in Removing the Product from the Surface

Depending on its quality, the pressure-sensitive adhesive might not separate easily from the surface once the job is done. Before purchasing a product, find out if the manufacturer specializes in adhesive technology. Surface protection materials with ordinary adhesives come with devastating effects. However, overexposure to sunlight can make the product hard to remove. Check the UV rating before purchase, and the longest time you can stick it to a surface.

Debonding

Has the film separated from the adhesive part and left residue on your surface? Dip a clean cloth in an organic solvent such as acetate or ethanol to resolve the issue. Take caution to avoid creating another cosmetic issue on your surfaces when removing the adhesive.

Edge Lifting

When the end of a protective cover breaks from the surface, then you’ll have an edge lift. The condition is common on metallic parts where composite protection is used. Aluminum is more prone to this than steel. Avoid edge lifting by choosing the right surface protection products for surfaces featuring metallic parts. After any construction project, the last thing you want is blemishes on your surfaces. Ghosting occurs when residues from cleaners, solvents, and markers remain on the surface. You can eliminate the marks with a diluted solvent.

The main objective of using surface protection is to prevent damage and make the clean-up job more manageable. Different surface protectors are designed for different types of finished surfaces and flooring. Consult a professional to give you the way forward if you don’t know what to use on your flooring.

Leave a Reply

Your email address will not be published. Required fields are marked *